TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 459 of 796
TM 9-2320-366-34-4 (18) Position end cap (17) on geroler (15) with seven bolts (18). CAUTION Tighten screws in a crisscross pattern to properly seat end cap. Failure to comply may result in damage to equipment. (19) Tighten bolts (18) to 15-40 lb-in. (2-5 N·m). (20) Verify geroler (15) and preformed packings (14 and 16) are properly seated. (21) Tighten bolts (18) to 20-30 lb-ft (27-41 N·m). (22) Install preformed packings (19 and 20) on 90-degree fitting (21). (23) Install 90-degree fitting (21) in end cap (17). End of Task. 26-25