TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 452 of 796

TM 9-2320-366-34-4 26-3. M1084/M1086 SWING DRIVE HYDRAULIC MOTOR REPAIR (CONT) (15) Install preformed packing (14) on geroler (15). CAUTION Position geroler with largest star point aligned with marked bolt hole on motor housing. Failure to comply may result in damage to equipment. (16) Install geroler (15) on spur gear shaft (12). (17) Install preformed packing (16) on geroler (15). (18) Position end cap (17) on geroler (15) with seven screws (18). CAUTION Tighten screws in a crisscross pattern to properly seat end cap. Failure to comply may result in damage to equipment. (19) Tighten screws (18) to 15-40 lb-in. (2-5 N·m). (20) Verify geroler (15) and preformed packings (14 and 16) are properly seated. (21) Tighten screws (18) to 20-30 lb-ft (27-41 N·m). End of Task. 26-18