TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 431 of 796
TM 9-2320-366-34-4 (8) Install preformed packing (11) in piston (9). (9) Install piston (9) on cylinder rod (10). (10) Position nut (12) on cylinder rod (10). (11) Tighten nut (12) to 195-265 lb-ft (264-359 N·m). (12) Install cylinder rod (10) in stiffleg cylinder (13). (13) Tighten screw (14) to 35-45 lb-in. (4-5 N·m). (14) Push cylinder rod (10) fully into stiffleg cylinder (13). (15) Screw cylinder rod (10) into stiffleg cylinder (13). (16) Install three preformed packings (15) and back-up rings (16) on two counterbalance valves (17). (17) Position two counterbalance valves (17) in stiffleg cylinder (13). (18) Tighten counterbalance valves (17) to 30-35 lb-ft (41-48 N·m). (19) Install four preformed packings (18) on plugs (19). (20) Install four plugs (19) in stiffleg cylinder (13). End of Task. 25-33/(25-34 Blank)