TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 417 of 796
TM 9-2320-366-34-4 25-5. M1089 TELESCOPIC LIFT CYLINDER REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Pan, Drain (Item 43, Appendix B) Caps, Vise Jaw (Item 12, Appendix B) Vise, Machinists (Item 82, Appendix B) Spanner Wrench Tool (Item 20, Appendix D) Sling, Cargo (Item 56, Appendix B) Materials/Parts Tape, Antiseizing (Item 85, Appendix C) Kit, Seal (Item 122, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Rag, Wiping (Item 60, Appendix C) Personnel Required (2) WARNING Telescopic lift cylinder weighs approximately 180 lbs (89 kgs). Attach a suitable lifting device prior to repair. Failure to comply may result in injury to personnel or damage to equipment. a. Disassembly. NOTE Step (1) requires the aid of an assistant. (1) Position telescopic lift cylinder (1) in vise. (2) Place drain pan under telescopic lift cylinder (1). (3) Extend inner cylinder rod (2) approximately 12 in. (31 cm). 25-19