TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 391 of 796
TM 9-2320-366-34-4 WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (17) Apply four or five drops of adhesive sealant in four threaded holes on two differential bearing caps (22). (18) Position two differential bearing caps (22) on differential carrier housing (17) with four washers (23) and screws (24). NOTE Perform step (19) only if a new pinion drive and ring gear set is being installed. (19) Record pinion cone variation number located on gear end of pinion drive (25). (20) Install inner bearing cone (26) and two bearing spacers (27) on pinion drive (25). (21) Install inner bearing cup (28) in bearing cage (29). (22) Install outer bearing cup (30) and outer bearing cone (31) in bearing cage (29). 24-33