TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 379 of 796
TM 9-2320-366-34-4 B. Ring Gear Backlash: (1) Attach dial indicator on the mounting flange on differential carrier (1). (2) Adjust the dial indicator so plunger is against tooth surface of ring gear (2). (3) Adjust the dial indicator to zero. (4) Rotate ring gear (2) a small amount in both directions. Dial indicator should read between 0.008-0.018 in. (0.020-0.045 cm). NOTE Perform step (5) if backlash reading is less than 0.008 in. (0.020 cm). (5) Loosen adjusting ring (3) on back side of hub body (4) and tighten adjusting ring facing the ring gear (5) to increase backlash. Change 1 24-21