TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 378 of 796
TM 9-2320-366-34-4 24-20 Change 2 24-2. INTERMEDIATE DIFFERENTIAL REPAIR (CONT) (71) Apply adhesive sealant to mounting flange of differential carrier (14) and threads of oil screen (65). (72) Position oil pump cover (66) on differential carrier (14) with nine washers (67) and screws (68). (73) Tighten screws (68) to 74-96 lb-ft (100-130 N•m). (74) Install oil screen (65) on oil pump cover (66). d. Adjustment A. Ring Gear Runout: (1) Attach dial indicator on mounting flange of differential carrier (1). (2) Adjust dial indicator so plunger is against the back surface of ring gear (2). (3) Adjust dial indicator to zero. (4) Rotate ring gear (2) a complete rotation. Dial indicator should not exceed 0.008 in. (0.020 cm) runout. WARNING NOTE Ensure pin inside oil pump cover fits in notch of pump. Failure to comply may result in damage to equipment. Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.