TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 376 of 796
TM 9-2320-366-34-4 24-18 Change 2 24-2. INTERMEDIATE DIFFERENTIAL REPAIR (CONT) (53.1) Apply a small amount of sealing compound to outside edge and spring cavity of oil seal (52). (54) Install oil seal (52) on differential carrier (14). (55) Install yoke seal (53) in output yoke (54). (56) Apply adhesive sealant to threads of self-locking nut (55). (57) Position output yoke (54) on inter-axle slide gear (49) with self-locking nut (55). (58) Position inter-axle nest assembly (56) in differential carrier (14). (59) Position helical drive gear (57) and thrust washer (58) on differential carrier (14) with match marks aligned to helical driven gear (59). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.