TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 375 of 796
TM 9-2320-366-34-4 (42) Position spring (40), shift fork (41), and shift collar (42) on differential carrier (14). (43) Install preformed packing (43) on inter-axle shift shaft (44). (44) Position inter-axle shift shaft (44) and inter-axle shift cylinder (45) on differential carrier (14). (45) Tighten inter-axle shift cylinder (45) to 80-100 lb-ft (108- 136 N·m). (46) Install bearing cup (46) in differential carrier (14). (47) Install bearing cup (47) in differential carrier (14). (48) Install bearing cone (48) on inter-axle rear side gear (49). (49) Install shims (50) on inter-axle rear side gear (49). (50) Position inter-axle rear side gear (49) in differential carrier (14). (51) Install bearing cone (51) on inter-axle side gear (49). NOTE End play should be 0.001-0.006 in. (0.002-0.015 cm), if the end play is too high, remove shims. If there is no end play, add shims. (52) Measure inter-axle rear slide gear (49) end play. (53) Repeat steps (48) through (52) until end play is within specifications. 24-17