TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 374 of 796

TM 9-2320-366-34-4 24-2. INTERMEDIATE DIFFERENTIAL REPAIR (CONT) (35) Install bearing cone (34) on housing (32). (36) Install two bearing cups (35) on ring gear (20) and housing (32). (37) Install ring gear (20) in differential carrier (14). (38) Install two adjusting rings (36) on differential carrier (14). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (39) Apply four or five drops of adhesive sealant to threads of four screws (37). NOTE Bearing caps and carrier legs are matched, use bearing cap match marked to carrier leg. (40) Position two bearing caps (38) on differential carrier (14) with four washers (39) and screws (37). (41) Tighten screws (37) to 132-169 lb-ft (179-229 N·m). 24-16