TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 365 of 796
TM 9-2320-366-34-4 (40) Remove self-locking nut (9) from pinion drive shaft (8). Discard self-locking nut. CAUTION Use care when removing pinion assembly. Failure to comply may result in damage to equipment. (41) Remove pinion drive shaft (8) from differential carrier (1). (42) Record pinion cone variation number at gear end of pinion drive shaft (8). (43) Remove three shims (57) and bearing cone (58) from pinion drive shaft (8). (44) Remove helical driven gear (20) and two spacers (59), from differential carrier (1). (45) Remove two bearing cones (60) and bearing cup (61) from differential carrier (1). (46) Remove self-locking nut (10) and input yoke (11) from input bearing cage (16). Discard self-locking nut. (46.1) Remove yoke seal (62) from input yoke (11). Discard yoke seal. (47) Remove input shaft (63) from input bearing cage (16). (48) Remove bearing cone (64) from input shaft (63). (49) Remove bearing cup (65) from input bearing cage (16). (50) Remove oil seal (66) from input bearing cage (16). Discard oil seal. Change 1 24-7