TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 361 of 796
TM 9-2320-366-34-4 (2) Attach dial indicator on mounting flange of differential carrier (1). (3) Adjust dial indicator so pointer is against tooth surface of ring gear (2). (4) Adjust dial indicator to zero. (5) Rotate ring gear (2) a small amount in both directions. Dial indicator should read between 0.008-0.018 in. (0.020-0.045 cm). Record results. (6) Perform steps (2) through (5) at two other locations on ring gear (2). (7) Remove oil filter screen (3) from pump cover (4). (8) Remove nine screws (5), washers (6), and oil pump cover (4) from differential carrier (1). (9) Remove oil pump (7) from pinion drive shaft (8). (10) Loosen self-locking nut (9) on pinion drive shaft (8). (11) Loosen self-locking nut (10) on input yoke (11). (12) Loosen self-locking nut (12) on output yoke (13). (13) Remove eight screws (14), washers (15), input bearing cage (16), three shims (17) and preformed packing (18) from differential carrier (1). Discard preformed packing. Change 1 24-3