TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 341 of 796
TM 9-2320-366-34-4 (2) Remove self-locking nut (2) from pinion drive (3). Discard self-locking nut. (3) Remove input yoke (4) from pinion drive (3). NOTE Vehicles serial number 0001 through 3133 were not originally equipped with yoke seals. Yoke seals may not be present if maintenance has not been performed previously on input yoke. (4) Remove yoke seal (5) from input yoke (4). Discard yoke seal. (5) Remove pinion seal (6) from bearing cage (7). Discard seal. (6) Remove eight screws (8) and washers (9) from bearing cage (6). (7) Remove bearing cage (6) from differential carrier housing (10). (8) Remove pinion drive (3) from bearing cage (6). NOTE Number of shims may vary. (9) Remove shims (11) from differential carrier housing (10). (10) Measure and record the thickness of shims (11). Change 1 23-3