TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 340 of 796
TM-9-2320-366-34 23-2 Change 2 Section II. MAINTENANCE PROCEDURE 23-2. FRONT AXLE DIFFERENTIAL CARRIER REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Adjustment INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Stand, Differential Carrier, Repair (TM 9-2320-366-20) Puller Kit, Universal (Item 51, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 25, Appendix B) Indicator Dial (Item 36, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Multiplier, Torque (Item 42, Appendix B) Holding Bar, Pinion (TM 9-2320-366-20) Press, Arbor, Hand Operated (Item 48, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Puller Kit, Universal (TM 9-2320-366-20) Caliper Set, Micrometer, Outside (Item 9, Appendix B) Socket Set, Impact (Item 58, Appendix B) Wrench, Impact, Electric (Item 88, Appendix B) Wrench, Torque, 0-75 lb-in. (Item 98, Appendix B) Materials/Parts Sealant, Adhesive (Item 66, Appendix C) Sealant, Adhesive (Item 67, Appendix C) Sealant, Adhesive (Item 68, Appendix C) Adhesive (Item 5, Appendix C) Compound, Sealing (Item 71, Appendix C) Compound, Sealing (Item 76.3, Appendix C) Lubricating Oil Gear (Item 52, Appendix C) Rag, Wiping (Item 60, Appendix C) Nut, Self-Locking (Item 193, Appendix F) Parts Kit, Seal Replacement (Item 386.1, Appendix F) Pin, Cotter (2) (Item 335, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) Personnel Required (2) a. Disassembly. (1) Install differential carrier (1) on differential carrier repair stand. WARNING Front axle differential carrier weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to moving. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant.