TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 326 of 796
TM 9-2320-366-34-4 22-4. TRANSFER CASE HOUSING REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Bearing Preload Adjustment e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module disassembled (para 22-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-150 lb-in. (Item 91, Appendix B) Caliper, Vernier (Item 11, Appendix B) Indicator, Dial (Item 36, Appendix B) Hammer, Soft Head (Item 33, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-366-20) Inserter and Remover, Spring (TM 9-2320-366-20) Puller Kit, Universal (Item 51, Appendix B) Puller Kit, Universal (Item 50, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Materials/Parts Gasket (2) (Item 67, Appendix F) Gasket (Item 71, Appendix F) Oil, Lubricating (Item 45, Appendix C) Kit, Seal (Item 120, Appendix F) Rag, Wiping (Item 60, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Gasket (Item 68, Appendix F) Gasket (Item 67, Appendix F) Washer, Seal (2) (Item 310, Appendix F) Packing, Preformed (3) (Item 294, Appendix F) Plug (Item 343, Appendix F) Personnel Required (2) a. Disassembly. (1) Remove eight screws (1) from C6 bearing retainer (2). (2) Remove C6 bearing retainer (2) from transfer case cover (3). (3) Remove 10 screws (4), access cover (5), and gasket (6) from transfer case cover (3). Discard gasket. 22-10