TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 322 of 796
TM 9-2320-366-34-4 22-6 Change 2 22-3. TRANSFER CASE MODULE REPAIR This task covers: a. Disassembly b. Assembly c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module removed (para 22-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Holding Bar, Pinion (TM 9-2320-366-20) Wrench, Impact, Electric (Item 88, Appendix B) Socket, Socket Wrench (Item 69, Appendix B) Multiplier, Torque (Item 42, Appendix B) Socket Set, Impact (Item 58, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Adapter, Socket Wrench (Item 2, Appendix B) Tools and Special Tools (Cont) Puller Kit, Universal (Item 51, Appendix B) Socket, Socket Wrench (Item 69, Appendix) (TM 9-2320-366-20) Materials/Parts Gasket (2) (Item 69, Appendix F) Gasket (Item 62, Appendix F) Oil, Lubricating (Item 45, Appendix C) Personnel Required (2) a. Disassembly. (1) Position transfer case module (1) with C6 clutch housing (2) facing up. (2) Remove 15 screws (3), two screws (4), C6 clutch housing (2), and gasket (5) from transfer case module (1). Discard gasket. (3) Remove nut (6), washer (7), and yoke (8) from rear output shaft (9).