TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 312 of 796
TM 9-2320-366-34-4 21-15. C7 CLUTCH HOUSING AND FRONT OUTPUT HOUSING ASSEMBLY REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module disassembled (para 22-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Puller Kit, Universal (Item 51, Appendix B) Indicator, Dial (Item 36, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-366-20) Inserter, Bearing and Bushing (TM 9-2320-366-20) Inserter, Bearing and Bushing (TM 9-2320-366-20) Inserter, Bearing and Bushing (TM 9-2320-366-20) Handle, Drive (TM 9-2320-366-20) Caliper, Vernier (Item 11, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Tools and Special Tools (Cont) Puller Kit, Universal (Item 50, Appendix B) Gage Set, Telescoping (Item 24, Appendix B) Pliers, Retaining Ring (Item 44, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Materials/Parts Sealring (Item 409, Appendix F) Sealring (Item 410, Appendix F) Lubricating Oil, Engine (Item 46, Appendix C) Rag, Wiping (Item 60, Appendix C) Sealring (Item 408, Appendix F) Seal, Plain Encased (Item 393, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) a. Disassembly. (1) Remove oil seal (1) from front output housing (2). Discard oil seal. (2) Remove front output shaft (3) from front output housing (2). (3) Remove roller bearing cone (4) from front output shaft (3). (4) Remove spacer (5) and shim(s) (6) from front output shaft (3). (5) Remove roller bearing cone (7) from front output housing (2). 21-70