TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 311 of 796
TM 9-2320-366-34-4 c. Assembly. NOTE Apply lubricating oil to all parts during assembly. (1) Install bushing (1) in sleeve (2). (2) Install sleeve (2) in C6 clutch housing (3). (3) Install seal rings (4 and 5) and C6 piston (6) in C6 clutch housing (3). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (4) Install spring retainer (7) in C6 clutch housing (3) with retaining ring (8). (5) Install thrust bearing (9) in C6 clutch housing (3). (6) Install five C6 reaction plates (10) and C6 friction plates (11), alternately, starting with C6 reaction plate on drive hub (12). (7) Position C6 drive hub (12) in C6 clutch housing (3). (8) Install C6 backing plate (13) in C6 clutch housing (3). CAUTION If transmission is prior to S/N 6510072173, C6 thrust bearing must be replaced. Failure to comply may result in damage to equipment. (9) Install retaining ring (14) in C6 clutch housing (3). d. Follow-On Maintenance. Assemble transfer case module (para 22-3). End of Task. 21-69