TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 296 of 796

TM 9-2320-366-34-4 21-11. REAR OUTPUT HOUSING REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Bearing Preload Adjustment e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transfer case module disassembled (para 22-3). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Puller Kit, Universal (Item 51, Appendix B) Indicator, Dial (Item 36, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-366-20) Gloves, Rubber (Item 26, Appendix B) Handle, Drive (TM 9-2320-366-20) Caliper, Vernier (Item 11, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-366-20) Tools and Special Tools (Cont) Pliers, Retaining Ring (Item 44, Appendix B) Goggles, Industrial (Item 28, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-366-20) Inserter, Bearing and Bushing (TM 9-2320-366-20) Materials/Parts Rag, Wiping (Item 60, Appendix C) Oil, Lubricating (Item 45, Appendix C) Seal, Plain Encased (Item 393, Appendix F) Shim(s) (Item 418, Appendix F) Shim(s) (Item 419, Appendix F) Shim(s) (Item 420, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) and ring gear (2) from output housing (3). 21-54