TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 288 of 796
TM 9-2320-366-34-4 21-9. P2 PLANETARY CARRIER MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Caliper, Micrometer, Inside (Item 10, Appendix B) Caliper, Vernier (Item 11, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Bushing Driver Set (TM 9-2320-366-20) Tools and Special Tools (Cont) Puller Kit, Universal (Item 50, Appendix B) Handle, Drive (TM 9-2320-366-20) Indicator, Dial (Item 36, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Parts Kit, Seal Replacement (Item 318, Appendix F) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) from P3 planetary ring gear (2). (2) Remove P2 planetary carrier (3) from P3 planetary ring gear (2). (3) Remove retaining ring (4) and P2 indexing ring (5) from P2 planetary carrier (3). 21-46