TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 282 of 796
TM 9-2320-366-34-4 21-7. P3 PLANETARY CARRIER MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Caliper, Vernier (Item 11, Appendix B) Handle, Drive (TM 9-2320-366-20) Press, Arbor, Hand Operated (Item 48, Appendix B) Tools and Special Tools (Cont) Inserter, Bearing and Bushing (TM 9-2320-366- 20) Pliers, Retaining Ring (Item 44, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) and indexing ring (2) from planetary carrier (3). (2) Remove four spindles (4), pinion gears (5), and eight thrust washers (6) from planetary carrier (3). (3) Remove eight roller bearings (7) from four pinion gears (5). (4) Remove bushing (8) from planetary carrier (3). 21-40 Change 1