TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 279 of 796
TM 9-2320-366-34-4 NOTE Step (4) requires the aid of an assistant. (4) Remove clutch piston (4), outer sealring (5), and inner sealring (6) from adapter housing (2). Discard sealrings. (5) Remove plug (7) and strainer (8) from adapter housing (2). (6) Remove preformed packing (9) from plug (7). Discard preformed packing. b. Cleaning/Inspection. WARNING Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to comply may result in injury or death to personnel. If personnel become dizzy while using cleaning solvent, immediately get fresh air and medical help. If dry cleaning solvent contacts skin or clothes, flush with cold water. If dry cleaning solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Clean all metal parts with dry cleaning solvent. NOTE Replace any part that fails visual inspection. Crocus cloth may be used to remove nicks, burrs, or scratches. (2) Inspect adapter housing (1) for cracks, nicks, scoring, and burring. 21-37