TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 274 of 796
TM 9-2320-366-34-4 21-5. CONVERTER HOUSING MODULE REPAIR (CONT) NOTE Perform steps (13) and (14) on drive hubs with two splines. (13) Remove retaining ring (9) from drive hub (10). (14) Remove drive hub (10) from gear (7). (15) Remove two bearings (11) from gear (7). (16) Remove vent plug (12) from converter housing (3). NOTE If transmission is SN 6510003100 or lower and engine speed sensor PN 29503523 has never been replaced, discard engine speed sensor and replace with PN 29509637 and preformed packing PN 29503383. (17) Remove screw (13), clip (14), and engine speed sensor (15) from converter housing (3). (18) Remove preformed packing (16) from engine speed sensor (15). Discard preformed packing. 21-32