TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 272 of 796

TM 9-2320-366-34-4 21-5. CONVERTER HOUSING MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Puller Set, Universal (Item 51, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Caliper, Vernier (Item 11, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Bushing Driver Set (TM 9-2320-366-20) Inserter, Bearing and Bushing (TM 9-2320-366-20) Handle, Drive (TM 9-2320-366-20) Tools and Special Tools (Cont) Press, Arbor, Hand Operated (Item 48, Appendix B) Pliers, Retaining Ring (Item 44, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Seal, Plain Encased (Item 394, Appendix F) Sealring (Item 402, Appendix F) Packing, Preformed (Item 301, Appendix F) Parts Kit, Seal Replacement (2) (Item 314, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) a. Disassembly. (1) Remove 10 bolts (1) from bearing retainer (2). (2) Position two bolts (1) in threaded holes of bearing retainer (2). CAUTION Tighten bolts evenly to remove bearing retainer. Failure to comply may result in damage to equipment. (3) Tighten two bolts (1) on bearing retainer (2). (4) Remove bearing retainer (2) from converter housing (3). (5) Remove two bolts (1) from bearing retainer (2). (6) Remove seal (4) from bearing retainer (2). Discard seal. (7) Remove sealring (5) from bearing retainer (2). Discard sealring. 21-30