TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 269 of 796
TM 9-2320-366-34-4 (8) Install C1 spring (9) in C2 piston (5). (9) Install sealring (10) on C1 balance piston (11). CAUTION Ensure slots in C1 balance piston are aligned with C1 piston. Failure to comply may result in damage to equipment. (10) Install C1 balance piston (11) in C2 piston (5). (11) Compress C1 balance piston (11) for installation of retaining ring (12). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (12) Install retaining ring (12) on C2 piston (5). (13) Install C2 piston (5) in clutch assembly (13). (14) Install C2 spring (14) in clutch assembly (13). (15) Install retaining ring (15) in clutch assembly (13). NOTE Alternately stack friction plates and reaction plates. (16) Install two C1 pressure plates (16), six friction plates (17), and five reaction plates (18) in clutch assembly (13). (17) Install retaining ring (19) in clutch assembly (13). 21-27