TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 268 of 796

TM 9-2320-366-34-4 21-4. ROTATING CLUTCH MODULE REPAIR (CONT) (28) Inspect thrust bearing (17) for scoring and damage. (29) Inspect clutch assembly (18) for scuffing, nicks, and burrs. (30) Measure spline wear on clutch assembly (18), maximum distance between splines 0.015 in. (0.038 cm). (31) Measure bushing (19), maximum inside diameter of bushing is 3.901 in. (9.908 cm). (32) Inspect shaft (20) for cracks, nicks, and scuffing. (33) Measure inside diameter of bushing (21), maximum diameter 0.795 in. (2.019 cm). c. Assembly. NOTE Apply lubricating oil to all parts during assembly. (1) Install bushing (1) in gear (2). (2) Install two seals (3) on gear (2). (3) Install sealring (4) on C2 piston (5). (4) Install sealring (6) on C1 piston (7). (5) Install C1 piston (7) in C2 piston (5). (6) Install C2 piston (5) on gear (2). (7) Install thrust bearing (8) in gear (2). 21-26