TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 262 of 796

TM 9-2320-366-34-4 21-4. ROTATING CLUTCH MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Inserter and Remover, Spring (TM 9-2320-366-20) Bushing Driver Set (TM 9-2320-366-20) Handle, Drive (TM 9-2320-366-20) Caliper, Vernier (Item 11, Appendix B) Straight Edge (Item 71, Appendix B) Pliers, Retaining Ring (Item 45, Appendix B) Pliers, Retaining Ring (Item 44, Appendix B) Gloves, Rubber (Item 26, Appendix B) Materials/Parts Parts Kit, Seal Replacement (Item 317, Appendix F) Packing, Preformed (Item 295, Appendix F) Sealring (Item 400, Appendix F) Sealring (Item 401, Appendix F) Sealring (Item 402, Appendix F) Sealring (Item 403, Appendix F) Rag, Wiping (Item 60, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Cloth, Abrasive (Item 22, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) a. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (1) Remove retaining ring (1) from clutch assembly (2). 21-20