TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 260 of 796
TM 9-2320-366-34-4 21-3. FRONT SUPPORT/CHARGING PUMP MODULE REPAIR (CONT) c. Assembly. NOTE Perform steps (1) and (2) if replacing pump housing not equipped with a main relief valve and cycloidal gear to pump housing equipped with main relief valve and cycloidal gear. (1) Replace drive hub PN 29503970 and gear PN 29511395 with drive hub PN 29514799 and gear PN 29511395 (para 20-5). (2) Replace converter pump PN 29503570 or 29511380 with converter pump PN 29514788 (para 7-14). (3) Install two dowel pins (1) in front support (2). (4) Install spacer (3) on front support (2). CAUTION Ensure flat surface on ground sleeve is aligned with index arrow on front support. Failure to comply may result in damage to equipment. (5) Install ground sleeve (4) in front support (2). (6) Install roller bearing (5) on front support (2) flush to within 0.009 in. (0.022 cm) of top edge of front support (2). 21-18