TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 256 of 796
TM 9-2320-366-34-4 21-3. FRONT SUPPORT/CHARGING PUMP MODULE REPAIR This task covers: a. Disassembly b. Cleaning/Inspection c. Assembly d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Transmission disassembled (para 21-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Puller Kit, Universal (Item 50, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Caliper, Vernier (Item 11, Appendix B) Goggles, Industrial (Item 28, Appendix B) Tools and Special Tools (Cont) Gloves, Rubber (Item 26, Appendix B) Inserter, Bearing and Bushing (TM 9-2320-366- 20) Materials/Parts Rag, Wiping (Item 60, Appendix C) Parts Kit, Seal Replacement (Item 314, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) a. Disassembly. (1) Remove three sealrings (1) from front support (2). Discard sealrings. (2) Remove bearing (3) from front support (2). NOTE Perform step (3) on pump housings not equipped with a main relief valve. (3) Remove eight screws (4) and pump housing (5) from front support (2). Discard pump housing. 21-14