TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 240 of 796
TM 9-2320-366-34-4 20-8. FRONT GEAR HOUSING AND IDLER GEAR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Camshaft removed (para 20-5). Oil pan removed (para 3-16). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Materials/Parts Sealing Compound (Item 76, Appendix C) Personnel Required (2) a. Removal. (1) Remove eight bolts (1) and washers (2) from front gear housing (3). (2) Remove five bolts (4) and washers (5) from front gear housing (3). (3) Remove three bolts (6), washers (7), and front gear housing (3) from cylinder block (8). (4) Remove sealing compound from back of front gear housing (3). (5) Remove expansion shield (9) from front gear housing (3). (6) Remove idler gear (10) and bearing sleeve (11) from cylinder block (8). (7) Remove three bolts (12) and stub shaft (13) from cylinder block (8). 20-58 Change 1