TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 237 of 796
TM 9-2320-366-34-4 c. Disassembly. NOTE Perform Steps (1) and (2) if camshaft or camshaft gear fails inspection. (1) Remove camshaft gear (1) from camshaft (2). (2) Remove woodruff key (3) from camshaft (2). d. Assembly. (1) Install woodruff key (1) on camshaft (2). WARNING Use extreme care when handling heated camshaft gear. Failure to comply may result in injury to personnel. (2) Heat camshaft gear (3) to approximately 600°F (316°C). (3) Install camshaft gear (3) on camshaft (2). 20-55