TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 235 of 796
TM 9-2320-366-34-4 NOTE Replace any part that fails visual inspection or size measurement requirements. (3) Measure thickness of thrust plate (2). Minimum thickness is 0.182 in. (0.462 cm). NOTE If camshaft fails inspection, camshaft bearings and cam roller followers must also be replaced. (4) Inspect camshaft lobes (3) and journals (4) for pitting, cracks, corrosion, and evidence of overheating. (5) Inspect camshaft gear (5) for cracks and damaged or broken teeth. (6) Measure distance between camshaft shoulder (6) and camshaft gear (7). Minimum distance is 0.188 in. (0.478 cm). 20-53