TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 224 of 796

TM 9-2320-366-34-4 20-6. PISTON AND CONNECTING ROD ASSEMBLY REPLACEMENT/REPAIR (CONT) (5) Remove No. 1 piston ring (7), No. 2 piston ring (8) and oil control ring (9) from piston crown (6). (6) Remove two connecting rod bolts (10) from connecting rod (5). (7) Remove piston pin bearing (11) from connecting rod (5). (8) Perform steps (1) through (7) on remaining pistons. c. Cleaning/Inspection. WARNING Some chemical agents (detergents, solvents, alkalis, etc.) may irritate skin or be harmful to the eyes, nose, and throat. Some must be used only with adequate ventilation. When working with potentially harmful chemical substances, read and heed all warnings on the product labels and follow prescribed safety precautions. When working with any potentially harmful substance; including live steam, hot water, and compressed air; wear appropriate safety equipment and use extreme care. Failure to comply may result in injury to personnel. (1) Soak six piston crowns (1), piston skirts (2), connecting rods (3), piston pins (4), and rod caps (5) in degreaser unit with carbon removing compound for at least one hour. 20-42