TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 223 of 796
TM 9-2320-366-34-4 NOTE Tag pistons, connecting rods, and rod caps by cylinder number during removal. (2) Remove two rod cap nuts (4) and rod cap (5) from connecting rod (6). (3) Remove rod bearing half (7) from rod cap (5). CAUTION Use care when removing piston and connecting rod to prevent damage to connecting rod bolt threads and crankshaft journals. Failure to comply may result in damage to equipment. (4) Remove piston and connecting rod assembly (8) from cylinder block (3). (5) Remove rod bearing half (7) from connecting rod (6). (6) Perform steps (1) through (5) on remaining pistons and connecting rod assemblies. b. Disassembly. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. NOTE All pistons are disassembled the same way. One piston shown. (1) Remove retaining ring (1) from piston skirt (2). (2) Remove retaining ring (3) from piston skirt (2). (3) Remove piston pin (4) and piston skirt (2) from connecting rod (5). (4) Separate piston crown (6) from piston skirt (2). 20-41