TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 222 of 796
TM 9-2320-366-34-4 20-6. PISTON AND CONNECTING ROD ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine mounted on maintenance stand (para 20-2). Cylinder head removed (para 3-6). Oil pump removed (para 3-17). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Extractor, Screw (Item 22, Appendix B) Caliper, Micrometer, Inside (Item 10, Appendix B) Pliers, Retaining Ring (Item 45, Appendix B) Degreaser, Portable Liquid Type (Item 18, Appendix B) Compressor, Ring, Piston (Item 16, Appendix B) Goggles, Industrial (Item 28, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Tools and Special Tools Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Materials/Parts Gage, Bearing Clearance (Item 33, Appendix C) Rag, Wiping (Item 60, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Lubricating Oil, Engine (Item 48, Appendix C) Carbon Removing Compound (Item 18, Appendix C) Personnel Required (2) a. Removal. NOTE All piston and connecting rod assemblies are removed the same way. One piston and connecting rod assembly shown. (1) Remove bolt (1) and cooling jet (2) from cylinder block (3). 20-40 Change 1