TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 213 of 796
TM 9-2320-366-34-4 (2) Remove 14 bolts (3) and washers (4) from seven crankshaft main bearing caps (5). NOTE • Retain main bearing half in each crankshaft bearing cap until inspection is completed. • Tag main bearing caps prior to removal. (3) Remove seven crankshaft main bearing caps (5) from cylinder block (1). WARNING Crankshaft weighs approximately 130 lbs (59 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (4) requires the aid of an assistant. (4) Remove crankshaft (2) from cylinder block (1). 20-31