TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 200 of 796
TM 9-2320-366-34-4 20-3. CYLINDER HEAD REPAIR (CONT) e. Assembly. NOTE Remove all cutting chips and debris from cylinder head fuel galley. Use a cotton swab, lightly coated with grease, to aid in removal of any particles. (1) Clean injector sleeve bores (1) in cylinder head (2). (2) Clean injector sleeves (3). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Spray dry cleaning solvent inside of each injector sleeve bore (1) in cylinder head (2) and outside of each injector sleeve (3). (4) Spray primer inside of each injector sleeve bore (1) in cylinder head (2) and outside of each injector sleeve (3). 20-18