TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 186 of 796
TM 9-2320-366-34-4 20-2. ENGINE TO MAINTENANCE STAND MOUNTING (CONT) b. Demounting. WARNING Engine weighs approximately 1500 lbs (681 kgs). Attach a suitable lifting device prior to demounting from maintenance stand. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (1) and (2) require the aid of an assistant. (1) Remove four nuts (1), bolts (2), and engine (3) from engine maintenance stand. (2) Position engine (3) on engine transport stand. (3) Remove six bolts (4) and engine stand bracket from engine (3). (4) Install tee fitting (5) on oil manifold (6). (5) Position preformed packing (7) and oil manifold (6) on engine (3). (6) Install two washers (8) and bolts (9) in oil manifold (6). (7) Position gasket (10) and oil tube (11) on center side cover (12). (8) Install two washers (13) and bolts (14) in oil tube (11). 20-4