TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 177 of 796
TM 9-2320-366-34-4 (67) Re-position lifting device on machine gun ring (59). (68) Remove three wooden blocks from cab roof (51). (69) Position machine gun ring (59) on cab roof (51). (70) Position 12 washers (60) and screws (61) in machine gun ring (59). (71) Tighten 12 screws (61) 23 sequence to 49-61 lb-ft (66- 82 N·m). b. Removal. (1) Remove 12 screws (1) and washers (2) from machine gun ring (3). (2) Position three wooden blocks on cab roof (4). WARNING Machine gun ring assembly weighs approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (3) through (7) require the aid of an assistant. (3) Position machine gun ring (3) on three wooden blocks. (4) Re-position lifting device on machine gun ring (3). Change 1 19-13