TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 174 of 796
TM 9-2320-366-34-4 19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL (CONT) (51) Measure and mark 7/8 in. (22 mm) in from flat edges of LH defrost cover (43) and RH defrost cover (44). (52) Cut out marked 7/8 in. (22 mm) from bottom and center flat edges of LH defrost cover (43) and RH defrost cover (44). (53) Clean threads of two clinch nuts (45) at top of windshield (46). (54) Clean threads of two clinch nuts (47) at bottom of windshield (46). 19-10 Change 1