TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 169 of 796
TM 9-2320-366-34-4 Change 2 19-5 (17.1) Position two spacers (20.1), washers (21) and screws (22) in seat mount (20). (18) Tighten two screws (16) to 71-89 lb-in. (8-10 N•m). (18.1) Tighten two screws (19 and 22) to 14-18 lb-ft (19-25 N•m). (19) Install two support brackets (23) on lower platform legs (24) with straight pins (25). (20) Install four cotter pins (26) in two straight pins (25). NOTE • Perform step (17.1) on vehicles with cab S/N 12076G or higher. Cab S/N located on B Pillar. • When tightening screws, flat sides of screws are to be in line with track sides.