TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 164 of 796
TM 9-2320-366-34-4 19-2 Change 2 19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL This task covers: a.Installation b.Removal c.Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Roof hatch removed (All models except M1093/M1094) (TM 9-2320-366-20-4) Roof hatch removed (M1093/M1094) (TM 9-2320- 366-20-4) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Drill, Electric, Portable (Item 21, Appendix B) Drill Set, Twist (Item 20, Appendix B) Blade, Hand, Hacksaw, (Item 7, Appendix B) Frame, Hand, Hacksaw, (Item 23, Appendix B) Wrench, Torque, 0-175 lb ft (Item 92, Appendix B) Tap and Die Set, (Item 55, Appendix B) Square Combination (Item 67, Appendix B) Wrench Set, Crowfoot Ratcheting, (TM 9-2320- 366-20) Tool Kit, Blind Rivet, (Item 76, Appendix B) Wrench, Torque 0-200 lb-in. (Item 93, Appendix B) Machine Gun Ring Drill Stop (Item 12, Appendix D) Tools and Special Tools (Cont) Machine Gun Ring Wooden Support (3) (Item 13, Appendix D) Screwdriver Attachment, Socket Wrench (Item 49.1, TM 9-2320-366-20 Appendix B) Dispenser, Sealant (Item 16.1, TM 9-2320-366-20 Appendix B) Materials/Parts Sealing Compound (Item 71, Appendix C) Sealant, Adhesive (Item 67, Appendix C) Seal (Item 374, Appendix F) Panel, Defroster (Item 305, Appendix F) Seal, Urethane Foam (102.25 in. 259.7 cm) (Item 399, Appendix F) Seal, Urethane Foam (86.75 in. 220.3 cm) (Item 398, Appendix F) Rubber Strip (Item 366, Appendix F) Sealing Compound (Item 76.1, Appendix C) Spacer (Item 42.01, Appendix F) Personnel Required (2) a. Installation. (1) Remove four screws (1) and washers (2) from center seat side brackets (3). (2) Remove center seat (4) from vehicle. (3) Remove four screws (5) and washers (6) from center seat mount (7). (4) Remove center seat mount (7) from vehicle. NOTE Store center seat, mount, screws, and washers for future installation.