TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 161 of 796
TM 9-2320-366-34-4 Change 2 18-107 c. Front Leaf Spring Resilient Mount Removal. (1) Install c-clamp on leaf spring (1). (2) Remove bolt (2), resilient mount (3), and spacer (4) from plate (5). Discard bolt, mount, and spacer. d. Front Leaf Spring Resilient Mount Installation. (1) Install C-clamp on leaf spring (1). (2) Install bolt (2) on leaf spring (1) with self-locking nut (3). (3) Tighten self-locking nut (3) to 69-79 lb-ft (90-110 N•m). (4) Position plate (4) on leaf spring (1) with plate aligned with matchmarks. (5) Position two U-bolts (5) on plate (4) with four washers (6) and self-locking nuts (7). (6) Tighten four self-locking nuts (7) to 200 lb-ft (271 N•m) in sequence shown. WARNING NOTE Use bolt P/N 12422628-002 on vehicles equipped with three leaf springs. Use bolt P/N 12422628-001 on vehicles equipped Frame rails approximately 350 lbs (159 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment.