TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 156 of 796
TM 9-2320-366-34-4 18-102 Change 2 18-7. DIGITIZATION KIT INITIAL INSTALLATION (CONT) (161) Remove two nuts (195), lockwashers (196), washers (197), and cover (198) from terminal block TB1 (199). Discard lockwashers. (162) Install terminal lug TL22 (193) on terminal block TB1 connector 58 (200). (163) Install terminal lug TL22 (194) on terminal block TB1 connector 58 (200). (164) Install two washers (197) and cover (198) on terminal block TB1 (199) with two washers (197), lockwashers (196), and nuts (195). (165) Remove screw (201) and lockwasher (202) from 24 VDC connector X1 (203). Discard lockwasher. (166) Install terminal lug TL20 (204) on 24 VDC connector X1 (203) with lockwasher (202) and screw (201). NOTE • Perform steps (162) through (164) on vehicle serial numbers 00001 through 11437. • Perform step (162) on vehicles equipped with WTEC II transmission controllers. NOTE Perform step (163) on vehicles equipped with WTEC III transmission controllers. NOTE Other terminal lugs are present at this location.