TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 149 of 796
TM 9-2320-366-34-4 Change 2 18-95 (117) Position Driver’s Storage Box (26) in mounting location on cab floor. (118) Position six washers (132) and screws (133) in Driver’s Storage Box (26). (119) Tighten six screws (133) to 70-85 lb-in (8-10 N•m). (120) Snap webbing (44). (121) Position washers (134) on plastic cab liner (5) as required. (122) Position AFT Storage Compartment (49) in vehicle with three washers (135) and screws (136). (123) Position three washers (137) and screws (138) in AFT Storage Compartment (49). (124) Tighten three screws (136 and 138) to 70-80 lb-in (8-9 N•m). (125) Position two washers (139) and screws (140) in AFT Storage Compartment (49). (126) Tighten two screws (140) to 70-80 lb-in (8-9 N•m). (127) Snap webbing (61) in place. CAUTION Add spacers behind supports on vehicle equipped with rear panels. Failure to comply may result in damage to equipment.