TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 146 of 796
TM 9-2320-366-34-4 18-92 Change 2 18-7. DIGITIZATION KIT INITIAL INSTALLATION (CONT) (89) Position radio rack in cab. (90) Position radio rack on bottom support (81). (91) Apply sealant to threads of eight screws (114). (92) Position eight washers (115) and screws (114) in bottom support (81). (93) Tighten eight screws (114) to 110-120 lb-in (12-14 N•m). (94) Apply sealant to threads of six screws (116). (95) Position MTS plate (82) on bottom support (81) with six washers (117) and screws (116). (96) Tighten six screws (116) to 70-80 lb-in (8-9 N•m). (97) Position four self-locking nuts (118) on MTS plate (82). WARNING NOTE • Position radio rack in cab with out top or bottom support or MTS plate. Forward of RH seat mounting location. Slide radio rack towards rear of cab. • Steps (89) and (90) require the aid of an assistant. Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE Position MTS plate with slotted holes towards rear of cab.