TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 143 of 796
TM 9-2320-366-34-4 Change 2 18-89 (68) Apply sealant to support legs (73) at locations paint was removed. (69) Apply sealant to threads of four screws (74 and 75). (70) Install FBCB2 shelf (75) on four support legs (73) with washers (77) and screws (74). Refer to Table 18-1 for hole location. (71) Install stiffening plate (78) at support legs (73), location holes seven and 10 with four washers (79) and screws (75). (72) Remove paint from top support (80), bottom support (81), and MTS plate (82). (73) Apply sealant to top support (80), bottom support (81), and MTS plate (82) where paint was removed. WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.