TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 137 of 796
TM 9-2320-366-34-4 Change 2 18-83 (36) Enlarge three holes at locations (20) to 25/64” (10 mm). (37) Apply primer and paint to three holes in cab roof (8) at locations (20). (38) Apply primer and paint to three rivuts (21). (39) Install three rivnuts (21) in cab roof (8) at locations (20). b. LH Stowage Box Assembly. (40) Remove six nuts (22), washers (23), screws (24), and storage box cover (25) from storage box (26). (41) Remove two nuts (27), screws (28), and clamp (29) from storage box cover (26). (42) Remove cotter pin (30), washer (31), and cover support arm (32) from storage box (26). Discard cotter pin. (43) Remove rubber grommet (33) from storage box (26). Discard rubber grommet. (44) Remove two nuts (34), screws (35), and clamp (36) from storage box (26). NOTE Use primer and paint as indicated in TM Paint TB43-0242.