TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 135 of 796
TM 9-2320-366-34-4 Change 2 18-81 (18) Enlarge three holes in RH cab side wall (15) to 17/32” (13 mm) at location (16). (19) Apply primer and paint to RH cab side wall holes at location (16). (20) Apply primer and paint to three rivnuts (6). (21) Install three rivnuts (6) in RH cab side wall at location (16). (22) Enlarge three holes in right side panel (13) at location (16) to 1/2” (13 mm). (23) Install right side panel (13) on RH cab side wall (15) with four fasteners (14). (24) Install bracket (12) on right side panel (13) with washer (11) and screw (10). (25) Position LH template (17) on rear cab wall (2). (26) Drill five 3/16” (5 mm) pilot holes at locations (18). (27) Remove LH template (17) from rear cab wall (2). NOTE Use primer and paint as indicated in TM Paint TB43-0242. NOTE Align LH rear cab wall template with LH cab side wall and roof. NOTE Steps (22) through (24) require the aid of an assistant.