TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 132 of 796
TM 9-2320-366-34-4 18-78 Change 2 18-7. DIGITIZATION KIT INITIAL INSTALLATION This task covers: a. Installation b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Cab storage boxes removed (TM 9-2320-366-20-4). Seat belts removed (TM 9-2320-366-20-4) Small arms mounts removed (TM 9-2320-366-20-4) Rear boarding handles removed (TM 9-2320-366-20- 4) RH seat removed (TM 9-2320-366-20-4) Power distribution panel removed for access (TM 9- 2320-366-20-4) Kick panel removed (TM 9-2320-366-20-4) Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B). Drill Electric, Portable (Item 21, Appendix B) Drill Set, Twist (Item 20, Appendix B) Machine Gun Ring Drill Stop (Item D12, Appendix D) Tools and Special Tools (Cont.) Clamp (2) (Item 13, Appendix B) Wrench, Torque (0-200 lb-in) (Item 93, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Drill Stop Collar Set (366-20 Appendix B) Materials/Parts Ties, Cable Plastic (Item 99, Appendix C) Rivet, Compression (4) (Item 365.1, Appendix F) Sealant (Item 65.1, Appendix C) Antiseize (Item 12.1, Appendix C) Personnel Required (2) Reference Material TB43-0242 a. Installation (1) Position RH template (1) on rear cab wall (2) with two screws (3). (2) Drill two 3/16” (5 mm) pilot holes at locations (4). (3) Remove two screws (3) and template (1) from rear cab wall (2). WARNING CAUTION Wear appropriate eye protection when drilling holes. Failure to comply may result in injury to personnel. Drill bit stop must be used to limit the depth of drill bit travel. Failure to comply may result in damage to cab.